Tips For Replacing a Window Handle
It is easy to replace your window handle in the convenience of your own home. Follow these tips for an easy operation and a beautiful looking finish.
Begin by removing the screws to reveal the screws within your uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.
1. Take a measurement of the length of the Spindle.
When you're replacing a window handle, it's important to determine the dimensions of the spindle correctly. This is because it can affect how tight or loose the handle is and whether it will lock correctly inside the window frame. The spindle is a metallic shaft that connects the handle to the lock inside the frame of the window. The spindle is available in the standard cross-section of 8mm for industry or the more traditional versions of 9mm. Modern industry standards are 8mm, however it wasn't always that way. It is essential to check the measurements when buying the handle you want to purchase.
The most efficient method to determine the spindle length is to take off the handle you have already installed and this can be done by turning it into the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will have to be removed) that retain the handle. After the handle is removed, take a measurement from the base to the end. This will give you the measurement required to purchase a new one.
There are plenty of choices when it comes to selecting a new window handle, from sleek chrome that fits into a contemporary home to traditional brass that looks stunning in restored Georgian rooms or even the more quaint Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing is to choose a style that suits your home.
Espag handles are typically used to uPVC window frames and are always the exact same size with a 43mm central. Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles from Cadenza come in distinct dimensions due to their bent blade that is used to operate the multi-point lock mechanism within the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline espag handles are compatible with right or left-handed windows. Cranked window handles are only used with windows that are open in one direction.
2. Take the handle off
A window handle that is sagging can be a hassle, regardless of whether the handle is damaged or worn out. The good news is that replacing the uPVC window handle is a very easy task you can complete yourself. All you require is some basic tools and a bit of time to complete the task.
You must first open the window and make sure it's not locked. The next step is to remove the screws that hold the handle in place. After these have been removed, you are able working on the removal of the handle itself.
The handle is connected to a spindle in the window frame. Depending on the type the handle is held in place either with a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows, including aluminium ones. They can be locked using keys to stop unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle you'll need a screwdriver with a flat blade to release the clip holding the handle in place. After this is released, the handle will fall off the spindle. Once the handle that was previously used is removed, you'll need determine the length of the spindle and ensure that the new handle is a good fit.
Once you've determined the proper size of the handle, screw it in the correct position. It is important to ensure that the handle is securely attached and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is crucial to ensure that the handle hasn't been placed upside down.
Finally, you should replace the screw cover caps. After you have completed this step, you should test the handle to make sure it's functioning properly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked one and then back.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first thing to exhibit signs of wear and tear or damage. It can be caused by natural causes or from regular use, or deliberate damage by opportunistic criminals who might want to open a closed window and gain entry to your property. A simple replacement can solve the problem and prevent it from happening again.
uPVC handles could also be difficult to remove if the locking mechanisms aren't working properly. It is often possible to fix the problem by replacing the multipoint locking mechanism, rather than the entire handle. This can save you money.
After you have removed the handle, you'll need to remove any screws that were holding it in place. These screws are usually located on the inside of the base of the handle. You may require an screwdriver to do this, and it's essential to not over tighten as this can cause the handle to loosen.
You'll then have to find the fixing pins or screws that hold the new handle in the correct position. They're usually on the inside of the base of the handle. You'll require a screwdriver to take them off. After they've been removed, you'll have to replace the screw caps in the event that you want to do so and test the new handle to confirm that it's functioning properly.
Install the handle by adjusting the spindle with the window's cutout mechanism. Then, screw it in. If you're looking to replace the screw covers make sure that the handle is in a slack position and that any screws are securely attached. After repairmywindowsanddoors is done, you're done and can enjoy your newly replaced window handle. This should help you avoid costly window and door replacements in the near future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it, the process is surprisingly simple and can be completed in a matter of a few steps. Identifying the type of window handle, measuring its spindle length and knowing what tools you'll need to complete the task are key. Safety is always the primary priority when working with tools and windows. It's also important to be patient and follow the steps to ensure you have a working handle that is safe to use.
To begin, find the screws that hold the window handle in place. Take them off while holding the handle firmly to stop it from falling down and causing injury. Once the screws are removed, you can put them in a safe location to be replaced later.
After you have removed the handle, you can now begin to put in your new one. It is important that the handle fits perfectly so that it functions correctly and locks the window in place. Next move the metal bar that is square on the handle into the hole in the window mechanism.
Once the new handle is installed, the final step is to replace the caps on the screws and verify that it works. If you're not happy with the results, or if your window does not shut or open properly Contact our experts for assistance.
The majority of homes in the UK have uPVC windows. As they are, a lot of them will require to be replaced at some point due to damage or wear. The procedure is fairly simple and can be done by anyone with some experience in DIY. The most important factor in the success of the procedure is to ensure that you're using a replacement handle that is compatible with your window's dimensions and style. If you're not sure about the type of handle you need, feel free to contact our team who can provide you with the options available.